Filter Cartridges - Aviation

6” O.D. OUTSIDE TO INSIDE MONITOR CARTRIDGE AVIATION CARTRIDGE

6” O.D. OUTSIDE TO INSIDE MONITOR CARTRIDGE AVIATION CARTRIDGE

152mm O.D. OUTSIDE/INSIDE MONITOR CARTRIDGE 152mm nominal outside diameter,FG-O Series monitor cartridges perform three jobs to give,you clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids, and shut down system...

View Cart









Details

FG-O-6111-6,FG-O-614-6,FG-O-622-6,FG-O-628-6,FG-O-633-6,FG-O-638-6,FG-O-643-6
152mm O.D. OUTSIDE/INSIDE MONITOR CARTRIDGE

152mm nominal outside diameter,FG-O Series monitor cartridges perform three jobs to give,you clean, dry fuel. They absorb free and emulsified water,
remove ultra-fine solids, and shut down system flow when hit with a localized slug of water. They are designed to flow from

outside-to-inside.

The presence of water or solids in the incoming fuel will be indicated by an increase in the pressure differential or a decrease in the flow rate
as the cartridge reaches its maximum capacity for solids, water or a combination of both. When either happens, the cartridges should be replaced.
Each FG-O Series monitor cartridge is constructed of various water absorbent media, plus fine filtration layers pleated to extend service life. The
perforated metal center tube provides balanced flow and structural strength to protect against back flow caused by sudden shut down of the system. The inner
and outer shells are heavy duty metal.

• Tested and qualified to meet 6th edition of EI 1583 Specifications and
Qualification Procedures - Aviation Fuel Filter Monitors with Absorbent
Type Cartridges
•  Multi-layered media for increased solids holding, water removal and
shutdown protection
•  All metal components are treated against corrosion
•  Structurally withstands a minimum of 12 bar
•  Heavy duty metal center tube and outer shell for extra structural strength
•  Not adversely affected by exposure to temperatures varying from
-40°C to 71°C
•  Available in rod-mount and screw-base (threaded base) designs

Relative part number

 

SCREW BASE MODEL

OD

(MM)

ID

(MM)

LENGTH

(MM)

FLOW RATE
(Lpm)
FG-O-614SB-6 152 89 339 197
FG-O-616SB-6 152 89 403 238
FG-O-622SB-6 152 89 549 333
FG-O-628SB-6 152 89 695 428
FG-O-629SB-6 152 89 768 477
FG-O-633SB-6 152 89 822 511
FG-O-638SB-6 152 89 949 594
FG-O-643SB-6 152 89 1105 700

 

 

SCREW BASE MODEL

OD

(MM)

ID

(MM)

LENGTH

(MM)

FLOW RATE
(Lpm)
FG-O-611-6 152 89 286 185
FG-O-614-6 152 89 386 220
FG-O-622-6 152 89 565 348
FG-O-628-6 152 89 730 454
FG-O-633-6 152 89 845 530
FG-O-638-6 152 89 965 609
FG-O-643-6 152 89 1099 697

Copyright © 2017 Guangzhou Coral Machinery Co.,Ltd.  All Rights Reserved.